Power 400 Watt 4-Channel Amplifier
T400-4
The Power T400-4 is a 4-channel amplifier capable of producing 100 Watts into each of its four channels at 2-Ohms. The T400-4 can run a 4-way full-range system or use component speakers on the front with subwoofers on the rear.
What's in the Box?
⬥ Power T400-4, 4-Channel Amplifier |
⬥ Mounting Hardware Kit |
⬥ Installation and Operation Manual |
Features
⬥ 24dB/octave crossover
⬥ MOSFET output stage
⬥ 4 Gauge power/ground connectors
⬥ MOSFET power supply
⬥ 2/4 channel input switch
⬥ Audiophile grade speaker connections
General Specifications
Cta-2006 Compliant |
|
Number of Channels |
4 |
Total Power (Sum of Rated Power) |
400 Watts |
Rated Power (RMS Continuous Power) |
60 Watts x 4 @ 4-Ohm
100 Watts x 4 @ 2-Ohm
200 Watts x 2 @ 4-Ohm Bridged
2-Ohm x 2 Bridged Stable |
Dynamic Power (PVC/PowerCube®) |
84 Watts x 4 @ 4-Ohm 0° Res
139 Watts x 4 @ 2-Ohm 0° Res
272 Watts x 2 @ 4-Ohm Bridged |
Bridgeable |
Yes |
Frequency Response |
20Hz to 20kHz +/- 1dB |
Input Sensitivity |
150 mV to 4 V |
Circuit Topology Class |
Class A/B |
Efficiency (average) |
69% @ 4-Ohm
68% @ 2-Ohm |
Total Harmonic Distortion (THD+Noise) |
4-Ohm: <1.0%
2-Ohm: <1.0% |
Signal Input |
Front Low level: 1 RCA pair
Rear Low level: 1 RCA pair
Input Switch: 2CH / 4CH |
Signal Output |
N/A |
Tone Controls |
Front Channels - Punch EQ
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz
Rear Channels - Punch EQ
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz
|
Crossover Controls |
Front High-Pass (HP): 50-500Hz 24dB/octave Butterworth
Front Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
Rear High-Pass (HP): 50-500Hz 24dB/octave Butterworth
Rear Low-Pass (LP): 50-500Hz 24dB/octave Butterworth |
Remote Controls |
Optional Remote Punch EQ
(overrides rear channel built-in Punch EQ) |
Visual Indicators |
Power
Thermal
Protect |
Power Wire Gauge |
8 AWG to 4 AWG |
Power Input Connector |
Block |
Speaker Wire Gauge |
8 AWG to 18 AWG |
Speaker Output Connector |
Screw terminal barrier strip |
Cooling |
Convection |
Heatsink |
|
Operating Voltage |
9 - 16 VDC |
Recommended Fuse (not included) |
60 A |
Average Current Draw (13.8V Music) |
30 A |
Max. Current Draw(13.8V Sinewave) |
60 A |
Suggested Alternator |
75 A |
Dimensions(H x W x D) |
2.14 x 8.14 x 13.66 (in) 5.42 x 20.68 x 34.69 (cm) |
Shipping Weight |
11.90 Lbs. (5.39 Kg.) |