Power 2500 Watt Class-bd Constant Power Amplifier
T2500-1bdCP
The Power T2500-1bdCP is a 2,500 Watt mono amplifier featuring Constant Power. The T2500-1bdCP is so flexible and powerful you can use a pair in bdSYNC mode to create one massive amplifier that can deliver a whopping 5 Kilowatts.
What's in the Box?
| ⬥ A Power T2500-1bd CP Mono Amplifier |
| ⬥ Mounting Hardware Kit |
| ⬥ 4mm Allen wrench for power and speaker terminals |
| ⬥ Installation and Operation Manual |
Features
⬥ 24dB/octave crossover
⬥ 1/0 AWG power/ground connectors
⬥ MOSFET power supply
⬥ Audiophile grade speaker connections
⬥ Infrasonic filter
⬥ MOSFET output stage
⬥ RCA pass-thru outputs
⬥ PowerSync - allows 2 amplifiers to be "strapped" together
⬥ MasterSync - allows 1 amplifier to control an array of amplifiers
⬥ 0°/180° Phase Switch
⬥ Blue L.E.D. Simulated VU Signal/Power Meters
General Specifications
| Cta-2006 Compliant |
|
| Number of Channels |
1 |
Total Power
(Sum of Rated Power) |
2500 Watts |
Rated Power
(RMS Continuous Power) |
1500 Watts x 1 @ 4-Ohm
2500 Watts x 1 @ 2-Ohm
2500 Watts x 1 @ 1-Ohm
Two amplifiers in bdSYNC:
5000 Watts x 1 @ 2-Ohm |
Dynamic Power
(PVC/PowerCube®) |
1823 Watts x 1 @ 4-Ohm
2940 Watts x 1 @ 2-Ohm
2980 Watts x 1 @ 1-Ohm |
| Bridgeable |
Yes
(two amps can be "strapped" together using bd-Sync2 cable to create one monster amplifier) |
| Frequency Response |
20Hz to 250Hz +/-0.5dB |
| Input Sensitivity |
150 mV to 4 V |
| Circuit Topology Class |
Class BD |
| Efficiency (average) |
81.9% @ 4-Ohm
77.7% @ 2-Ohm
64.5% @ 1-Ohm |
Total Harmonic Distortion
(THD+Noise) |
4-Ohm: <1.0%
2-Ohm: <1.0%
1-Ohm: <1.0% |
| Signal Input |
1 RCA pair |
| Signal Output |
1 RCA pair |
| Tone Controls |
Bass: 0dB to +18dB @ 45Hz |
| Crossover Controls |
Low-Pass (LP): 35Hz-250Hz @ 24dB/octave Butterworth
Infrasonic: 12dB/octave Butterworth, -3dB @ 28Hz |
| Remote Controls |
Optional Remote PEQ
(overrides built-in Punch Bass) |
| Visual Indicators |
Power (Blue LED)
Thermal (Red LED)
Protect (Yellow LED)
Output -00dB to +2dB @ 11 steps (Blue LEDs)
Battery 9VDC to 16VDC @ 11 steps (Blue LEDs) |
| Power Wire Gauge |
1/0 AWG |
| Power Input Connector |
Block |
| Speaker Wire Gauge |
8 AWG to 16 AWG |
| Speaker Output Connector |
Block |
| Cooling |
Convection |
| Heatsink |
|
| Operating Voltage |
9 - 16 VDC |
Recommended Fuse
(not included) |
300 A |
|
Average Current Draw (13.8V Music) |
175 A |
|
Max. Current Draw(13.8V Sinewave) |
350 A |
| Suggested Alternator |
200 A |
|
Dimensions(H x W x D) |
2.14 x 8.14 x 21.875 (in)
5.44 x 20.68 x 55.66 (cm) |
| Shipping Weight |
21.7 Lbs. (9.84 Kg.) |
