Prime 1200 Watt Mono Amplifier
R2-1200X1
Primed for Performance, the R2-1200X1 is a 1200 watt, class-D amplifier, capable of operating at 4Ω, 2Ω or 1Ω mono. This amplifier is extremely efficient because of its Class-D technology which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass. For subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music.
What's in the Box?
⬥ Prime Amplifier |
⬥ Mounting Hardware |
⬥ Allen Wrench |
⬥ Remote Level Control (only available on amplifiers with mono channels) |
⬥ 4-pin Molex pig tail connectors |
⬥ Installation & Operation Manual |
Features
⬥ Balanced Differential Inputs with RCA Pass Through Outputs
⬥ Variable Input Gain adjustment level
⬥ Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power)
⬥ High Level Input Capable
⬥ Features C.L.E.A.N. Set-up
⬥ Includes RLC Remote Level Control
⬥ Top Mounted Control Panel
⬥ Variable Infrasonic Filter
⬥ Continuously Variable On Board Punch EQ
⬥ Short Circuit & Over Current Protection
⬥ Cast aluminum heat sink
⬥ CEA-2006 Compliant & CE Compliant
⬥ Class-D Topology
⬥ Rollback Protection
⬥ Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
General Specifications
Cta-2006 Compliant |
|
Number of Channels |
1 |
Total Power (Sum of Rated Power) |
1200 Watts |
Rated Power (RMS Continuous Power) |
400 Watts x 1 @ 4Ω 800 Watts x 1 @ 2Ω 1200 Watts x 1 @ 1Ω |
Dynamic Power (PVC/PowerCube®) |
489 Watts x 1 @ 4Ω 889 Watts x 1 @ 2Ω 1389 Watts x 1 @ 1Ω |
Bridgeable |
No |
Frequency Response |
20 Hz - 250 Hz |
Input Sensitivity |
Low-Level: 150 mV - 4 V High-Level: 450 mV - 12 V |
Circuit Topology Class |
Class-D |
Efficiency (average) |
> 80% |
Total Harmonic Distortion (THD+Noise) |
4Ω: <1.0% 2Ω: <1.0% 1Ω: <1.0% |
Signal Input |
Low-Level: 2 RCA High-Level: 4-Pin Molex |
Signal Output |
Low-Level: 2 RCA (Pass-Thru active with RCA or Hi-Level input) |
Tone Controls |
0 to +18 dB @ 45 Hz |
Crossover Controls |
Low-Pass: 50 Hz - 250 Hz @ 12dB/Octave Butterworth Infrasonic: 15 Hz - 40 Hz @ 12dB/Octave Butterworth |
Remote Controls |
Yes |
Visual Indicators |
Power/Protect LED C.L.E.A.N. In C.L.E.A.N. Out |
Power Wire Gauge |
4 AWG |
Power Input Connector |
Compression Terminal Block |
Speaker Wire Gauge |
8 AWG |
Speaker Output Connector |
Compression Terminal Block |
Cooling |
Convection |
Heatsink |
|
Operating Voltage |
9 - 16 VDC |
Recommended Fuse (not included) |
|
Average Current Draw (13.8V Music) |
200 A |
Max. Current Draw(13.8V Sinewave) |
121 A |
Suggested Alternator |
|
Dimensions(H x W x D) |
1.9" x 6.8" x 11.3" (4.9 cm x 17.3 cm x 28.5 cm) |
Shipping Weight |
|