Prime 500 Watt 4-Channel Amplifier
R2-500X4
Primed for Performance, the R2-500X4 is a 500 watt, full-range Class-D amplifier capable of operating at 4Ω or 2Ω stereo and 4Ω bridged/mono. This amplifier is extremely efficient because of its Class-D technology which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. supply that generates more power as voltage increases.
What's in the Box?
| ⬥ Prime Amplifier |
| ⬥ Mounting Hardware |
| ⬥ Allen Wrench |
| ⬥ Remote Level Control (only available on amplifiers with mono channels) |
| ⬥ 4-pin Molex pig tail connectors |
| ⬥ Installation & Operation Manual |
Features
⬥ Balanced Differential Inputs with RCA Pass Through Outputs
⬥ High Level Input Capable
⬥ 2/4 Channel Input Selection Switch
⬥ Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power)
⬥ Features C.L.E.A.N. Set-up
⬥ Front and Rear Variable Input Gain adjustment level
⬥ Short Circuit & Over Current Protection
⬥ Top Mounted Control Panel
⬥ CEA-2006 Compliant & CE Compliant
⬥ Cast aluminum heat sink
⬥ Full Range Class-D
⬥ Rollback Protection
⬥ Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
General Specifications
| Cta-2006 Compliant |
|
| Number of Channels |
4 |
Total Power
(Sum of Rated Power) |
500 Watts |
Rated Power
(RMS Continuous Power) |
75 Watts x 4 @ 4Ω
125 Watts x 4 @ 2Ω
250 Watts x 2 @ 4Ω Bridged/Mono |
Dynamic Power
(PVC/PowerCube®) |
90 Watts x 4 @ 4Ω
160 Watts x 4 @ 2Ω
300 Watts x 2 @ 4Ω Bridged/Mono |
| Bridgeable |
Yes |
| Frequency Response |
20 Hz - 20 kHz |
| Input Sensitivity |
Low-Level: 150 mV - 4 V
High-Level: 450 mV - 12 V |
| Circuit Topology Class |
Class-D |
| Efficiency (average) |
|
Total Harmonic Distortion
(THD+Noise) |
4Ω: <1.0%
2Ω: <1.0% |
| Signal Input |
Front Low-Level: 4 RCA
Front High-Level: 4-Pin Molex
Rear Low-Level: 4 RCA
Rear High-Level: 4-Pin Molex
Input Switch: 2/4 Input
(works for RCA/hi-level inputs) |
| Signal Output |
Low-Level: 2 RCA
(Pass-Thru active with RCA or Hi-Level input) |
| Tone Controls |
No |
| Crossover Controls |
Front High-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Front Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Rear High-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Rear Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
All-Pass: Yes |
| Remote Controls |
No |
| Visual Indicators |
Power/Protect
C.L.E.A.N. In
C.L.E.A.N. Out (front)
C.L.E.A.N. Out (rear) |
| Power Wire Gauge |
4 AWG |
| Power Input Connector |
Compression Terminal Block |
| Speaker Wire Gauge |
8 AWG |
| Speaker Output Connector |
Compression Terminal Block |
| Cooling |
Convection |
| Heatsink |
|
| Operating Voltage |
9 - 16 VDC |
Recommended Fuse
(not included) |
80 A |
|
Average Current Draw (13.8V Music) |
|
|
Max. Current Draw(13.8V Sinewave) |
59 A |
| Suggested Alternator |
|
|
Dimensions(H x W x D) |
1.9" x 6.8" x 10.1"
(4.9 cm x 17.3 cm x 25.5 cm) |
| Shipping Weight |
|
