Prime 250 Watt Mono Amplifier
R2-250X1
Primed for Performance, the R2-250X1 is a 250 watt, Class-D amplifier, capable of operating at 4Ω or 2Ω mono. This amplifier is extremely efficient because of its Class-D technology which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass. Perfect for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music.
What's in the Box?
| ⬥ Prime Amplifier |
| ⬥ Mounting Hardware |
| ⬥ Allen Wrench |
| ⬥ Remote Level Control (only available on amplifiers with mono channels) |
| ⬥ 4-pin Molex pig tail connectors |
| ⬥ Installation & Operation Manual |
Features
⬥ Balanced Differential Inputs with RCA Pass Through Outputs
⬥ Variable Input Gain adjustment level
⬥ Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power)
⬥ High Level Input Capable
⬥ Features C.L.E.A.N. Set-up
⬥ Includes RLC Remote Level Control
⬥ Top Mounted Control Panel
⬥ Variable Infrasonic Filter
⬥ Continuously Variable On Board Punch EQ
⬥ Short Circuit & Over Current Protection
⬥ Cast aluminum heat sink
⬥ CEA-2006 Compliant & CE Compliant
⬥ Class-D Topology
⬥ Rollback Protection
⬥ Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
General Specifications
| Cta-2006 Compliant |
|
| Number of Channels |
1 |
Total Power
(Sum of Rated Power) |
250 Watts |
Rated Power
(RMS Continuous Power) |
160 Watts x 1 @ 4Ω
250 Watts x 1 @ 2Ω |
Dynamic Power
(PVC/PowerCube®) |
209 Watts x 1 @ 4Ω
328 Watts x 1 @ 2Ω |
| Bridgeable |
No |
| Frequency Response |
20 Hz - 250 Hz |
| Input Sensitivity |
Low-Level: 150 mV - 4 V
High-Level: 450 mV - 12 V |
| Circuit Topology Class |
Class-D |
| Efficiency (average) |
|
Total Harmonic Distortion
(THD+Noise) |
4Ω: <1.0%
2Ω: <1.0% |
| Signal Input |
Low-Level: 2 RCA
High-Level: 4-Pin Molex |
| Signal Output |
Low-Level: 2 RCA
(Pass-Thru active with RCA or Hi-Level input) |
| Tone Controls |
0 to +18 dB @ 45 Hz |
| Crossover Controls |
Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Infrasonic:
15 Hz - 40 Hz @ 12dB/Octave Butterworth |
| Remote Controls |
Yes |
| Visual Indicators |
Power/Protect LED
C.L.E.A.N. In
C.L.E.A.N. Out |
| Power Wire Gauge |
4 AWG |
| Power Input Connector |
Compression Terminal Block |
| Speaker Wire Gauge |
8 AWG |
| Speaker Output Connector |
Compression Terminal Block |
| Cooling |
Convection |
| Heatsink |
|
| Operating Voltage |
9 - 16 VDC |
Recommended Fuse
(not included) |
50 A |
|
Average Current Draw (13.8V Music) |
|
|
Max. Current Draw(13.8V Sinewave) |
30 V |
| Suggested Alternator |
|
|
Dimensions(H x W x D) |
1.9" x 6.8" x 8.1"
(4.9 cm x 17.3 cm x 20.5 cm) |
| Shipping Weight |
|
