Punch Marine Grade Media Receiver with 2.3" Dot Matrix Display
PMX-1
The PMX-1 features a scratch resistant wet bonded display, superior Bluetooth® audio, AUX and USB inputs. The Element Ready™ design also provides protection against water, dust, and UV rays.
What's in the Box?
| ⬥ Source Unit |
| ⬥ Trim Bezel |
| ⬥ Mounting Plate |
| ⬥ U Bracket |
| ⬥ Screws |
| ⬥ Power / Speaker Harness |
| ⬥ Installation & Operation Manual |
Features
⬥ Wet bonded 2.3" Full Dot Matrix LCD Display
⬥ 9H Tempered Glass Screen
⬥ Compatible with PMX-BTUR Steering Wheel Remote
⬥ AUX and USB Inputs with USB Charging
⬥ A2DP and AVRCP Bluetooth® Wireless Streaming
⬥ Independent Subwoofer Level Control
⬥ 7-Band Graphic EQ + PEQ
⬥ Voltage gauge with Low voltage Warning
⬥ AM/FM/WB Tuner
⬥ Selectable HP / LP / AP Crossovers with Selectable Slope 12 / 24 dB/Oct
⬥ Multi Region Radio Frequencies
⬥ IP6 Marine Grade Front Panel
⬥ FCC, CE and EN60945 Certified
General Specifications
| Cta-2006 Compliant |
|
| Number of Channels |
2 |
Total Power
(Sum of Rated Power) |
300 Watts |
Rated Power
(RMS Continuous Power) |
100 Watts x 2 @ 4-Ohm
150 Watts x 2 @ 2-Ohm
300 Watts x 1 @ 4-Ohm Bridged |
Dynamic Power
(PVC/PowerCube®) |
120 Watts x 2 @ 4-Ohms 0° Res
203 Watts x 2 @ 2-Ohms 0° Res |
| Bridgeable |
Yes |
| Frequency Response |
20Hz-20kHz |
| Input Sensitivity |
150 mV to 12 V |
| Circuit Topology Class |
Class A/B |
| Efficiency (average) |
69% @ 4-Ohm |
Total Harmonic Distortion
(THD+Noise) |
4-Ohm: <1.0%
2-Ohm: <1.0% |
| Signal Input |
Hi/Low Level: 1 RCA Pair |
| Signal Output |
Low Level: 1 RCA Pair |
| Tone Controls |
0dB to +14dB @ 12.5kHz
0dB to +18dB @ 45Hz |
| Crossover Controls |
High-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth
Low-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth
All-Pass: Yes |
| Remote Controls |
Optional Punch Level Control (PLC2) Ready |
| Visual Indicators |
Power/Protect/Thermal LED
Input Clip LED3
Output Clip LED1,2,3
LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD |
| Power Wire Gauge |
8 AWG to 4 AWG |
| Power Input Connector |
Captive C-Clamp |
| Speaker Wire Gauge |
8 AWG to 18 AWG |
| Speaker Output Connector |
Captive C-Clamp |
| Cooling |
Convection |
| Heatsink |
|
| Operating Voltage |
9 - 16 VDC |
Recommended Fuse
(not included) |
50 A |
|
Average Current Draw (13.8V Music) |
23 A |
|
Max. Current Draw(13.8V Sinewave) |
45 A |
| Suggested Alternator |
75 A |
|
Dimensions(H x W x D) |
2.38 x 7.76 x 9.86 (in)
6.05 x 19.71 x 25.04 (cm) |
| Shipping Weight |
9.5 Lbs. (4.3 Kg.) |
