Punch 1,000 Watt Class-bd 5-Channel Amplifier
P1000X5
The Punch P1000X5 is an ultra-efficient 5-channel amplifier capable of running your entire system without excessive drain on your charging system. The P1000X5 is perfect for running a front/rear system and a dedicated subwoofer.
What's in the Box?
⬥ Punch Amplifier |
⬥ Mounting Hardware |
⬥ Allen Wrench |
⬥ Quick Setup Guide |
Features
⬥ High level input capable with Auto Turn-On circuit
⬥ On-board Punch EQ with +18dB boost @ 45Hz
⬥ 12dB/octave Butterworth crossover
⬥ Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
⬥ Features C.L.E.A.N. Set-up
⬥ Muted turn on
⬥ Stealth top mounted control panel
⬥ Short circuit protection
⬥ Cast aluminum heatsink
⬥ Over current protection
⬥ 2/4 channel input switch
⬥ Infrasonic filter
General Specifications
Cta-2006 Compliant |
|
Number of Channels |
5 |
Total Power (Sum of Rated Power) |
1000 Watts |
Rated Power (RMS Continuous Power) |
75 Watts x 4 + 150 Watts x 1 @ 4Ω 125 Watts x 4 + 300 Watts x 1 @ 2Ω N/A Watts x 4 + 500 Watts x 1 @ 1Ω 250 Watts x 2 + N/A Watts x 1 @ 4Ω Bridged |
Dynamic Power (PVC/PowerCube®) |
115 Watts x 4 + 299 Watts x 1 @ 4Ω 0° Res 190 Watts x 4 + 540 Watts x 1 @ 2Ω 0° Res N/A Watts x 4 + 863 Watts x 1 @ 1Ω 0° Res 380 Watts x 2 + N/A Watts x 1 @ 4Ω Bridged 0° Res |
Bridgeable |
Yes (front/rear channels) |
Frequency Response |
Front/Rear: 20Hz - 20kHz +/-3dB Sub: 20Hz - 500Hz +/-3dB |
Input Sensitivity |
150 mV - 12 V |
Circuit Topology Class |
Class A/B + Class BD (Sub) |
Efficiency (average) |
Front/Rear: 66% @ 4-Ohm Sub Channel: 80% @ 4-Ohm |
Total Harmonic Distortion (THD+Noise) |
<1.0% |
Signal Input |
Input Switch: Hi/Low level input Input Switch: 2/4 channel input Hi/Low Level: 3 RCA Pair Sub: front/sub input switch |
Signal Output |
- |
Tone Controls |
Sub: 0dB to +18dB @ 45Hz |
Crossover Controls |
Front: 50Hz - 250Hz High-Pass @ 12dB/Octave Rear: 50Hz - 250Hz High-Pass @ 12dB/Octave Sub: 50Hz - 250Hz Low-Pass Sub: 28Hz infrasonic filter @ 12dB/Octave |
Remote Controls |
Optional Punch Level Control (PLC2) Ready |
Visual Indicators |
Power/Protect/Thermal LED Input Clip LED3 Output Clip LED1,2,3 LED Color Legend: 1BLUE: <0.5% THD 2VIOLET: 1% THD 3RED: 10%+ THD |
Power Wire Gauge |
4 AWG |
Power Input Connector |
Block |
Speaker Wire Gauge |
12 AWG |
Speaker Output Connector |
Block |
Cooling |
Convection |
Heatsink |
|
Operating Voltage |
9 - 16 VDC |
Recommended Fuse (not included) |
150 A |
Average Current Draw (13.8V Music) |
75 A |
Max. Current Draw(13.8V Sinewave) |
150 A |
Suggested Alternator |
100 A |
Dimensions(H x W x D) |
2.38 x 7.76 x 15.03 (in) 6.05 x 19.71 x 38.18 (cm) |
Shipping Weight |
15.3 Lbs. (6.93 Kg.) |