Punch 1,000 Watt 2-Channel Amplifier
P1000X2
The Punch P1000X2 is a 2-channel stereo amplifier capable of producing 500 Watts into each channel at 2-Ohms. The P1000X2 amplifier is great with full-range or component systems or can be bridged for use with several subwoofers.
What's in the Box?
| ⬥ Punch Amplifier |
| ⬥ Mounting Hardware |
| ⬥ Allen Wrench |
| ⬥ Quick Setup Guide |
Features
⬥ High level input capable with Auto Turn-On circuit
⬥ 12dB/octave Butterworth crossover
⬥ Features C.L.E.A.N. Set-up
⬥ Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
⬥ RCA pass-thru outputs
⬥ On-board Punch EQ with +18dB boost @ 45Hz
⬥ Cast aluminum heatsink
⬥ Muted turn on
⬥ Stealth top mounted control panel
⬥ Short circuit protection
⬥ Over current protection
General Specifications
| Cta-2006 Compliant |
|
| Number of Channels |
2 |
Total Power
(Sum of Rated Power) |
1000 Watts RMS |
Rated Power
(RMS Continuous Power) |
300 Watts x 2 @ 4-Ohm
500 Watts x 2 @ 2-Ohm
1000 Watts x 1 @ 4-Ohm |
Dynamic Power
(PVC/PowerCube®) |
401 Watts x 2 @ 4-Ohms 0° Res
656 Watts x 2 @ 2-Ohms 0° Res |
| Bridgeable |
Yes |
| Frequency Response |
20Hz to 20kHz +/- 1.0dB |
| Input Sensitivity |
150 mV - 12 V |
| Circuit Topology Class |
Class A/B |
| Efficiency (average) |
69% @ 4-Ohm
64% @ 2-Ohm |
Total Harmonic Distortion
(THD+Noise) |
4-Ohm: <1.0%
2-Ohm: <1.0% |
| Signal Input |
Hi/Low level: 1 RCA pair |
| Signal Output |
Low level: 1 RCA pair |
| Tone Controls |
Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz
Function depends upon LP/AP/HP switch position |
| Crossover Controls |
High-Pass/Low-Pass (HP/LP): 50Hz-250Hz 12dB/octave Butterworth |
| Remote Controls |
Optional Punch Level Control (PLC2) Ready |
| Visual Indicators |
Power/Protect/Thermal LED
Input Clip LED3
Output Clip LED1,2,3
LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD |
| Power Wire Gauge |
4 AWG |
| Power Input Connector |
Captive C-Clamp |
| Speaker Wire Gauge |
8 AWG to 18 AWG |
| Speaker Output Connector |
Captive C-Clamp |
| Cooling |
Convection |
| Heatsink |
|
| Operating Voltage |
9 - 16 VDC |
Recommended Fuse
(not included) |
140 A |
|
Average Current Draw (13.8V Music) |
70 A |
|
Max. Current Draw(13.8V Sinewave) |
140 A |
| Suggested Alternator |
100 A |
|
Dimensions(H x W x D) |
2.38 x 7.76 x 15.03 (in)
6.05 x 19.71 x 38.18 (cm) |
| Shipping Weight |
15 Lbs. (6.80 Kg.) |
