1,000 Watt Mono IPX6 Element Ready™ Amplifier
M5-1000X1
Serious marine sound, made simple. The M5 amplifiers feature the next level of Element Ready™ design from Rockford Fosgate that’s built as rugged as the outdoor environment it’s used in.
Features & Benefits:
Element Ready™: Purpose Built for the Marine Environment, Rockford’s Element Ready™ products are built to stand up to Water, Salt, and UV, making sure your amplifiers stand the test of time.
C.L.E.A.N.: Our Patented circuit with input and output clip indicators help match the source unit to the amplifier, which makes for easy set-up and optimizes musical output.
P.O.W.E.R. Supply: The unique P.O.W.E.R. supply continues to generate more than rated power as the voltage increases, giving you the output, you demand.
What's in the Box?
⬥ (1) Control Cover (1130-75511-01) |
⬥ (1) Extension Harnesses (1130-75505-01) |
⬥ (1) Pwr/Gnd/Rem Input (1040-61932-01) |
⬥ (1) RCA Input Harness (1560-56458-02) |
⬥ (1) Speaker Out Connector (1040-56811) |
⬥ (1) Allen wrench |
⬥ (1) RF sticker |
⬥ (1) PRESET warning label |
⬥ (1) Performance verification certificate |
Features
⬥ Element Ready™ design with integrated harness & panel seals
⬥ PRESET removes the need to set-up and tune the amp when used with Rockford Fosgate UTV audio kits
⬥ Play all day, easy to integrate, and keep music playing for extended lengths of time
⬥ C.L.E.A.N. input/output clip detection and indicator LEDs
⬥ Constant Power provides instantaneous delivery of output over varying impedance loads
⬥ Focused mass heat sink allows critical aluminum material to be located around hottest internal devices
⬥ OEM and aftermarket radio integration inputs
⬥ Top mounted control panel with Element Ready™ smoked lens cover
⬥ Quality & Performance tested using proprietary RATS (Rockford Automated Testing System)
⬥ Low Impedance Stability
⬥ Class-BD technology provides 75-80% efficiency over traditional class A/B designs
⬥ Discrete Surface Mount technology with 1% tight-tolerances for high efficiency & reduced cross-talk
⬥ MESHA 4 reduces MOSFET temps, lowers distortion, increases durability and prolongs device life span
⬥ Chassis Isolation from mounting points greatly reduces possible introduction of vehicle noise
⬥ Balanced Differential Inputs eliminates noise picked up by signal cables
⬥ Remote-Out feature when using high level inputs
General Specifications
Cta-2006 Compliant |
|
Number of Channels |
1 |
Total Power (Sum of Rated Power) |
1000 Watts |
Rated Power (RMS Continuous Power) |
CTA-2006 Continuous Power Rating ≤1.0% THD+N 500 Watts x 1 @ 4Ω 750 Watts x 1 @ 2Ω 750 Watts x 1 @ 1Ω |
Dynamic Power (PVC/PowerCube®) |
CTA-2006 Dynamic Power Rating 525 Watts x 1 @ 4Ω 900 Watts x 1 @ 2Ω 1000 Watts x 1 @ 1Ω |
Bridgeable |
— |
Frequency Response |
30Hz - 245Hz |
Input Sensitivity |
150mVrms - 12Vrms |
Circuit Topology Class |
Class-BD |
Efficiency (average) |
>80% |
Total Harmonic Distortion (THD+Noise) |
<0.1% THD+N @ 1 Watt |
Signal Input |
Low-Level: 2 RCA High-Level: 4-Pin Molex |
Signal Output |
— |
Tone Controls |
Sub: 0-18dB @ 45Hz |
Crossover Controls |
Low-Pass: 50 Hz - 250 Hz @ 12dB/Octave Butterworth Infrasonic: 30 Hz @ 12dB/Octave Butterworth |
Remote Controls |
No |
Visual Indicators |
Power: Blue Protect: Red Input Clip: Red Output Clip: Blue/Red |
Power Wire Gauge |
8 AWG |
Power Input Connector |
Compression Terminal Block Replacement 1040-57997 |
Speaker Wire Gauge |
16 AWG |
Speaker Output Connector |
4-Pin Molex |
Cooling |
Convection |
Heatsink |
Extruded Aluminum |
Operating Voltage |
9 - 16 VDC |
Recommended Fuse (not included) |
— |
Average Current Draw (13.8V Music) |
— |
Max. Current Draw(13.8V Sinewave) |
45 A @ 4Ω 75 A @ 2Ω 100 A @ 1Ω |
Suggested Alternator |
|
Dimensions(H x W x D) |
1.7" x 4.25" x 8.41" (42.8 mm x 108 mm x 213 mm) Does not include harnesses |
Shipping Weight |
6 Lbs. (2.7 Kg.) |