M2 750 Watt 5-Channel Element Ready™ Amplifier
M2-750X5
Designed to withstand the elements, the M2-750X5 amplifier is an Element Ready™ 750 watt, full-range class-D model, capable of operating at 4Ω or 2Ω stereo, and 4Ω bridged/mono with a subwoofer channel that can be run at 4Ω or 2Ω. This amplifier is extremely efficient because of its class D technology which reduces demand on the electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass.
What's in the Box?
| ⬥ M2 Element Ready™ Amplifier |
| ⬥ Mounting Hardware |
| ⬥ Allen Wrench |
| ⬥ Remote Level Control (only available on amplifiers with mono channels) |
| ⬥ 4-pin Molex pig tail connectors |
Features
⬥ Element Ready™ design protects against outdoor exposure
⬥ Zinc Nickel-plated Marine grade brass connection terminals
⬥ UV stable powder coated cast aluminum heatsink
⬥ C.L.E.A.N. input/output clip detection and indicator LEDs
⬥ Conformal coated circuit board protects against dust and water
⬥ Optimized using AudioGraph PowerCube measurement tool
⬥ Includes RLC Remote Level Control
⬥ Continuously Variable On Board Punch EQ
⬥ Focused mass heat sink allows critical aluminum material to be located around hottest internal devices
⬥ Top Mounted Control Panel
⬥ 2/4/5 Channel Input Selection Switch
⬥ Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
⬥ Short Circuit & Over Current Protection
⬥ Variable Infrasonic Filter
⬥ Integrated Power and Speaker Terminals
⬥ Balanced Differential Inputs eliminates noise picked up by signal cables
⬥ Integration with OEM and Aftermarket Radios
⬥ "Auto-Sense" turn-on with remote out (high level in)
⬥ Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power)
⬥ Low Impedance Stability
⬥ Quality & Performance tested using proprietary RATS (Rockford Automated Testing System)
⬥ CEA-2006 Compliant & CE Compliant
General Specifications
| Cta-2006 Compliant |
|
| Number of Channels |
5 |
Total Power
(Sum of Rated Power) |
750 Watts |
Rated Power
(RMS Continuous Power) |
50 Watts x 4 + 200 Watts x 1 @ 4Ω
100 Watts x 4 + 350 Watts x 1 @ 2Ω
200 Watts x 2 + N/A @ 4Ω Bridged/Mono |
Dynamic Power
(PVC/PowerCube®) |
70 Watts x 4 + 241 Watts x 1 @ 4Ω
114 Watts x 4 + 426 Watts x 1 @ 2Ω
234 Watts x 2 + N/A @ 4Ω Bridged/Mono |
| Bridgeable |
Yes |
| Frequency Response |
20 Hz - 20 kHz |
| Input Sensitivity |
Low-Level: 150 mV - 4 V
High-Level: 450 mV - 12 V |
| Circuit Topology Class |
Class D |
| Efficiency (average) |
|
Total Harmonic Distortion
(THD+Noise) |
4Ω: <1.0%
2Ω: <1.0% |
| Signal Input |
Front Low-Level: 2 RCA
Front High-Level: 4-Pin Molex
Rear Low-Level: 2 RCA
Rear High-Level: 4-Pin Molex
Sub Low-Level: 2 RCA
Sub High-Level: 4-Pin Molex |
| Signal Output |
N/A |
| Tone Controls |
0 to +18 dB @ 45 Hz |
| Crossover Controls |
Front High-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Front Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Rear High-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Rear Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Sub Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Sub Infrasonic:
15 Hz - 40 Hz @ 12dB/Octave Butterworth |
| Remote Controls |
Yes |
| Visual Indicators |
Power/Protect
C.L.E.A.N. In
C.L.E.A.N. Out (front)
C.L.E.A.N. Out (rear)
C.L.E.A.N. Out (sub) |
| Power Wire Gauge |
4 AWG |
| Power Input Connector |
Compression Terminal Block |
| Speaker Wire Gauge |
8 AWG |
| Speaker Output Connector |
Compression Terminal Block |
| Cooling |
Convection |
| Heatsink |
|
| Operating Voltage |
9 - 16 VDC |
Recommended Fuse
(not included) |
120 A |
|
Average Current Draw (13.8V Music) |
|
|
Max. Current Draw(13.8V Sinewave) |
71 A |
| Suggested Alternator |
|
|
Dimensions(H x W x D) |
1.9" x 6.8" x 11.2"
(4.9 cm x 17.3 cm x 28.5 cm) |
| Shipping Weight |
6.13 Lbs. (2.78 Kg) |
