Ride Louder with Kenwood XM50F 5.25” Coaxial Motorcycle Speakers

---

Introduction

The Kenwood XM50F 5.25” coaxial motorcycle speakers are engineered specifically to deliver crisp, high-output sound on the open road. Built to replace the stock speakers in select Harley-Davidson Touring motorcycles from 1998 to 2013, these high-performance speakers are made to cut through wind, engine, and road noise — providing crystal-clear audio at any speed. With a rugged build, high power handling, and direct-fit design, the XM50F speakers bring your ride’s soundtrack to life with stunning clarity and volume.

---

Loud and Clear Sound at Any Speed

The Kenwood XM50F is tuned to perform in high-noise environments. Each speaker features a 2-ohm impedance and 150 watts RMS power handling, making it ideal for use with factory or aftermarket amplifiers. The Injection-Molded Polypropylene (IMPP) woofer cones provide powerful midbass, while the 1-inch PEI dome tweeters deliver detailed highs that stay clean and non-fatiguing — even at highway speeds. Whether you’re rocking classic tunes or bass-heavy hits, the XM50F ensures that your music is always front and center.

---

Tailored Fit for Harley-Davidson Touring Models

Designed as a direct-fit upgrade, the Kenwood XM50F fits seamlessly into the factory fairing speaker locations on a wide range of Harley-Davidson Touring bikes. There's no need for modifications or custom brackets — these speakers drop right into place using the existing hardware and wiring. For 1998–2013 Touring models, it’s a hassle-free upgrade that transforms your audio experience.

---

Compatible Harley-Davidson Models (1998–2013)

The Kenwood XM50F speakers are specifically designed to fit the following Harley-Davidson motorcycles:

1998–2005 (with aftermarket amp installed):

• FLHT Electra Glide Standard

• FLHTC Electra Glide Classic

• FLHTCU Ultra Classic

• FLTR Road Glide (installs behind factory grille cloth)

2006–2013 (radio-powered or amplified):

• FLHX Street Glide

• FLHTC Electra Glide Classic

• FLHTCU Ultra Classic

• FLTR Road Glide (factory grille cloth required)

• FLTRU Road Glide Ultra

Note: Not compatible with 1998–2005 models equipped with the Harley-Davidson branded amplifier mounted under the Tour Pak.

---

Marine-Rated Durability for the Road

The XM50F isn’t just about sound — it’s built for the ride. The weather-resistant construction handles exposure to moisture, UV rays, and dust without degrading over time. The speaker cones are injection-molded for strength, and the materials used are optimized for outdoor environments. Whether you're touring through summer heat or light rain, these speakers are ready for the ride.

---

Designed for Amplified Sound Systems

While they work with head units, the Kenwood XM50F shines brightest when paired with a 2-ohm stable amplifier. The high sensitivity (94 dB) ensures excellent volume and efficiency, making them a great match for aftermarket amp upgrades like Kenwood, Rockford Fosgate, or Soundstream Harley-specific amps. Their wide frequency response (40 Hz – 25 kHz) ensures full-range sound that feels immersive and powerful.

---

Key Features

• 5.25” Coaxial Motorcycle Speakers – Designed for Harley-Davidson Touring models.

• 2-Ohm Impedance – Pulls more power from factory and aftermarket amplifiers.

• 150 Watts RMS / 300 Watts Peak – Handles high volume without distortion.

• Injection-Molded Polypropylene Woofer – Delivers clear midbass response.

• 1” PEI Dome Tweeter – Produces detailed, non-fatiguing high frequencies.

• Weather-Resistant Design – Built to perform in tough outdoor conditions.

• Grilles Included – Not compatible with Road Glide factory grille placement.

---

Why Choose the Kenwood XM50F?

The Kenwood XM50F is purpose-built to give your Harley the volume and clarity it deserves. With high power handling, a durable build, and plug-and-play compatibility for 1998–2013 Harley Touring models, these speakers provide a major upgrade over factory sound — no fabrication or guesswork needed. Whether you’re riding across the country or just out for a weekend cruise, the XM50F delivers the soundtrack to match your journey.

---

What’s in the Box?

• 2 x Kenwood XM50F 5.25” Coaxial Motorcycle Speakers

• 2 x Grilles (note: not compatible with Road Glide installations)

• Mounting Hardware

• User Manual

• Kenwood Logo Decals

---

Specifications

• Speaker Size: 5.25 inches

• Power Handling (RMS): 150 watts

• Peak Power: 300 watts

• Impedance: 2 ohms

• Frequency Response: 40 Hz – 25,000 Hz

• Sensitivity: 94 dB

• Mounting Depth: 2.45 inches

• Tweeter Size: 1” PEI Dome

• Grille Compatibility: Not for Road Glide models — install behind stock cloth grille

• Warranty: 2 Years

---

FAQs

Do the Kenwood XM50F speakers fit my Harley?

• If you have a 1998–2013 Harley-Davidson Touring model, they’re a direct-fit replacement for your factory front fairing speakers.

Do I need an amplifier for these?

• While they’ll work off head-unit power, they’re best paired with a 2-ohm stable amplifier to unlock their full performance.

Do these speakers come with grilles?

• Yes, but the grilles are not compatible with Road Glide fairings — for those models, the speakers install behind the factory cloth grille.

Are these speakers waterproof?

• They’re weather-resistant, designed to handle road spray, moisture, and UV exposure, perfect for outdoor motorcycle use.

Can I install these myself?

• Yes, installation is straightforward and uses factory mounting hardware and wiring — a direct drop-in for compatible models.

How do these compare to stock speakers?

• The Kenwood XM50F offers dramatically improved clarity, volume, and durability, especially at highway speeds or in noisy environments.